Loader

Don’t Sink Into Despair! 6 Tips on How to Repair a Sink Effectively

Tips on How to Repair a Sink Effectively

Do you have a backed-up sink? Yuck!

Is your sink faucet leaking? Oh, no!

When your sink isn’t working properly, you need to know how to repair a sink like a pro!

It’s not uncommon to notice an issue with a sink in your home or business. Sinks, just like everything else, have wear and tear over time. Some sinks are even more prone to damages or issues than others.

For instance, if a sink is used frequently in a place of business, then it’s more likely to experience an issue from time to time. If a sink has a garbage disposal or if your home or business is located in an area that has hard water, then these are other reasons why your sink might have issues more frequently.

Don’t let common sink issues sink you into despair. It’s time to learn how to correct these issues with ease! Continue reading below for everything you need to know.

1. A Sink Snake

Sink snakes are fairly inexpensive and can be an easy way to unclog a drain. Sink snakes are long pieces of thin plastic with hooks or arms that branch off at the end of the plastic on the sides. You place the snake down the drain and then pull it up.

When you pull the snake out, those little hooks or arms the branch off at the end will help remove hair and other residue or build-up that’s clogging the drain. You can do this every so often, even when the drain isn’t clogged, to ensure your drain is kept clear of any blockage.

2. O-Ring Replacement

When the handles or handle on your faucet is placed into the on or off position, it signals to either open or close the valve, which allows water to enter or stops it from entering. There are O-rings inside the valve that stop the water from coming through the faucet.

These O-rings will wear down over time. If you’re located in an area with hard water, then it’s even more common for these O-rings to go bad. When the O-rings are bad, you can tell because they become more like a hard plastic material rather than a rubber that they once were.

If the O-rings have gone bad, you can either replace the O-rings or replace the valve unit as a whole.

3. P-Trap Pipe Replacement

Some sinks begin to leak under them rather than at the faucet. This could be due to metal piece corroding or plastic pieces cracking. If there’s a leak under your sink, the first thing you want to check is the curved pipe, otherwise known as the P-Trap pipe.

This is the pipe where leaks normally come from because clogs are common here. It can also be damaged at times by certain items that your store under your sink. You can use a pipe wrench and sealer to remove the damaged P-Trap pipe and replace it with a new one.

4. Chipped Stone or Porcelain

Some sinks are made of stone while others are made of porcelain. If your stone sink has a chip in it, then don’t panic. A chip is actually a bit easier to fix than a crack in the stone.

To repair a chipped stone sink, take the piece of stone that broke off and wash it with acetone. Then, use epoxy to reattach the broken-off piece. Your sink might even have a filler putty that you can use as well.

To repair a broken porcelain sink, take a porcelain repair compound and mix it until you have the color you need. When done, you can apply the mixture using a razor blade. Let the mixture dry.

Once dry, you can then use a bit of nail polish remove on a cotton ball to smooth out the surface.

5. Clogged Aerator Cleaning

Is your sink experiencing low water pressure? If so, a clogged aerator might be the cause. This is common in areas that have hard water or high mineral content in their water supply.

Minerals and calcium can begin to build up within the small openings of the aerator. To correct this issue, you can remove the aerator and place it in white vinegar for several hours. Once it’s cleaned, you can then remove it from the vinegar and replace it.

6. The Professionals

Some common plumbing issues with sinks are simple to fix at home, but not everyone knows the ins and outs of sink repair like the pros. You can start the repair process at home by discovering what the cause of the problem is, and if you feel comfortable enough, you can make simple repairs as well.

If you’re ever in doubt, however, don’t hesitate to contact the professionals. A professional plumbing service will know how to correct any issues you have with your sink with ease! Working with a professional will also give you peace of mind knowing that everything is being taken care of in a professional and correct manner.

Learn How to Repair a Sink Today!

Is your sink giving you issues? Don’t let a faulty sink bring you down! Learn how to repair a sink today with the use of this helpful guide.

Review all of these repair tips listed above for an easy repair job, and when you feel as though the job is one for the professionals, don’t hesitate to call.

Click here to contact us and schedule your sink repair services today!

Leave a Comment

Your email address will not be published.

*
*

Pin It on Pinterest

Share This
Back To Top